Principle of operation: Easy filling from the taped shrink bags in a specific size
Maximum bag width: 450 mm
Special features: Photoelectric scanning of the taped bags, rotatable filling aids
Output: Up to 40 bags/minute
Function: The operator slides the product from the sliding plate over the rotatable
filling aids into the inflated bag without having to lift the product
Top air nozzles: 2 sensor-controlled nozzles follow the contours of the product
Air nozzle bottom: 1 rigid nozzle at the bottom
Volume of side-channel compressor: 1400 m3/h
Throughput width: 860 mm
Max. throughput height: 300 mm
Belt speed: 0.04 – 0.12 m/sec.
Matching shrinking technology: All shrink tanks and shrink tunnels
Bag length: 250 – 1000 mm
Bag width: 200 – 600 mm
Type of bag: Taped bags
Number of bag pull-off units: Up to 6 different formats of vacuum bags for
parallel operation
Belt speed of the single-bag module: Variably adjustable, belt start and stop using
foot switch
Width of product conveyor belt of the single bag module: 100 mm
Bag length: 250 – 1000 mm
Bag width: 200 – 560 mm
Type of bag: Taped bags
Number of bag pull-off units: Up to 10 different formats of vacuum bags for
parallel operation
Belt speed of the single-bag module: Variably adjustable, belt start and stop using
foot switch
Finger belt module: 2 filling stations including 10 narrow, driven finger belts in total.
Can be used independently by up to 2 operators
Sealing bar length: 2 x 660 mm
Spacing between the bars: 650 mm
Lid height: 180/300 mm
Sealing bar height: 35, 55 or 75 mm (0-25 mm on request)
Bag cut: Cut-off perforation or cut-off device with rotation knife
Output: Up to 3 cycles/min
Matching shrinking technology: AT 8, AS 660
Sealing bar length: 1000 mm front / 515 mm side
Max. product length: 1000 mm
Lid height: 230 mm (without conveyor belt)
Sealing bar height: Automatic height adjustmentfrom 0 mm to 70 mm
Automatic conveyor belt: Pneumatically driven
Pump size: 160 / 250 m3/h
Matching shrinking technology: AT 8, AS 660
Sealing bar length (soft vacuum): 1000 mm
Sealing bar length (hard vacuum): –
Spacing between the bars: 500 mm
Lid height: 230 mm
Sealing bar height: 45 or 65 mm
Bag cut: Cut-off perforation
Matching shrinking technology: AT 8, AS 660
Sealing bar length: 4 x 620 mm
Spacing between the bars: 520 mm
Max. product height: 230 mm
Lid: Stainless steel
Pump size: 63/ 100/ 160 m3/h
Matching shrinking technology: AT 6 / AT 7
Sealing bar length: 4 x 820 mm
Spacing between the bars: 700 mm
Max. product height: 250 mm
Lid: Stainless steel
Pump size: 160 / 300 m3/h
Matching shrinking technology: AT 6 / AT 7
Sealing bar length: 4 x 920 mm
Spacing between the bars: 870 mm
Max. product height: 270 mm
Lid: Stainless steel
Pump size: 160 / 300 m3/h
Matching shrinking technology: AT 6 / AT 7
Sealing bar length: 2 x 800 mm
Spacing between the bars: 650 mm
Lid height: 200/300 mm
Sealing bar height: 35 or 55 mm
Bag cut: Cut-off perforation
Output: Up to 3 cycles/min
Matching shrinking technology: AT 8, AS 660
